-
NET 60
$1,050 Excl. VAT Security Systems Add to cart24Vdc barrier for residential and collective use 4m width passage barrier
4m width passage barrier High usage factor Safety. Obstacle detection Self. Learning of open/close distances (encoder). Electronic soft start-soft stop. Nonuse of external limit switches Housing for battery back-up (optional ADN01 kit) LED lights on a boom as optional.
Highlights
- 1 Barrier with control panel NTS424E
- 1 Cylindrical boom ANT01
- 1 Sticker ANT08
- 1 Photocell FT06
- 1 Receiver IRRE2-250
- 2 Transmitters IRIS-IR02
- 1 Flashing lamp LUMI
-
NET 61
$1,150 Excl. VAT Security Systems Add to cart24Vdc barrier for residential and collective use 6m width passage barrier
6m width passage barrier High usage factor Safety. Obstacle detection Self. learning of open/close distances (encoder). Electronic soft start-soft stop. Nonuse of external limit switches Housing for battery back-up (optional ADN01 kit) LED lights on A boom as optional.
Highlights
KIT INCLUDES:
- 1 Barrier with control panel NTS424E
- 1 Cylindrical boom ANT01
- 1 Sticker ANT08
- 1 Photocell FT06
- 1 Receiver IRRE2-250
- 2 Transmitters IRIS-IR02
- 1 Flashing lamp LUMI
-
NS-2
$200 Excl. VAT SIP Video Intercom Add to cartLong Data Transmission Distance
The NS-2 is Akuvox 2-wire IP network switch which provides a convenient way to upgrade analogue intercom systems, no need for rewiring. Its super long transmission distance & good compatibility with existing lines makes it fit for most of old buildings.
-
OC05
Call for Price Fire AlarmCONVENTIONAL OPTICAL SMOKE DETECTOR, 1 remote led output, EN54-7 , CE according to CPD/CPR
Highlights
- Photoelectric scattering (Tyndall effect)
- 1 remote alarm indicator output
- Lockable
- Standard EN54-7
- Cable section max 2,5mm²
- 12V version
-
OMS 3301
Call for Price Fire AlarmOUTPUT MODULE FOR SIGNALING DEVICES 1X
Intelligent Input/Output module for the Loop 3000 for the control of external optical and acoustic signaling devices with bidirectional isolator according to EN 54-17 and EN 54-18. Including one monitored fault input and one potential free relay output for signaling devices.
Highlights
- Integrated automatic switch function of the output at “external signal line on/off” signal by the fire control panel
- Connecting module with one freely programmable fault input and one output for the connection of signalling devices
- Programming of different switching variants of input and output also with time control
- Monitoring of the operating status via Loop 3000
- Independent programming of input and output
- Automatic and manual addressing on Loop 3000
- Integrated isolator and T-branch option
- Functions completely integrated via Loop 3000-protocol
- Multi-color LED for alarm (red) and fault (yellow)
- Robust wall-mounted housing according with IP 54
-
P7 (POE, Touch Active)
$500 Excl. VAT Security Systems Add to cartP7 is a new generation access control device of Anviz. The P7 adopts touch activation technologies in the fingerprint sensor and keypad easy for user operation. An access control, designed with PoE communication and access interface separation, makes the P7 easy to Installation and costs down the labor. The powerful access control function is indispensable for P7. Relay output for door control, Wiegand output and group, time zones. Multi-communication with TCP/IP, RS485, and Mini USB port. The Alarm push function will protect access control safe.
Highlights
- ST Microelectronics® 32-Bit High-Speed CPU.
- Stable and reliable.
- 5000 Fingerprints, 50000 Records.
- Touch Active.
- Wakeup Sensor.
- Touch Backlight Keypad.
- Door Open Sensor.
- RS485, USB Device,TCP/IP(PoE),Wiegand In/Out.
- Direct Lock Control.
- Group, Time Zone, Scheduled Bell.
- Doorbell & Relay Out.
- Standard with EM card
- Tamper Alarm.
- FP, Card, ID+FP, ID+PW, PW+Card, FP+Card, FP+PW, and IP53
-
PA2 Accessory Kit
$175 Excl. VAT SIP Speakers/P.A Add to cartGet an official accessory kit for your Fanvil PA2 SIP Paging Gateway & Video Intercom. This kit includes four modules: a speaker, microphone, button, and IP camera. The 5W loudspeaker and -38dB±2 microphone are waterproof and dustproof, and both come with a self-adhesive layer for simple installation.
The stainless steel button is IP67 and IK10 rated with a mechanical lifetime of 200,000 clicks. It is backlit using an LED with a lifetime of 400,000 hours. The IP camera module gives you 720p HD video. It is powered through the PA2 gateway’s LAN port. The wide-angle lens with f/1.2 aperture provides color video down to 0.1 lux.
PA2-Kit Accessory Bundle Package Contents:
Note: This does not include PA2 Gateway.
- Speaker module
- Microphone module
- Button module
- IP camera module
-
PA2 Customizable SIP Paging Gateway
$205 Excl. VAT VoIP/SIP Communication Add to cartPA2 is a SIP video intercom & Paging device for industry applications. The media stream transmission adopts standard IP/RTP/RTSP protocol. It inherits the advantages of the stability and sound quality of the FANVIL VOIP Phone. It is perfectly compatible with all the current SIP IPPBX /IMS platforms, such as Asterisk, Broadsoft, 3CX, Elastix, etc. It has various functions and interfaces, Such as Intercom, broadcast, video, security, and recording, to adapt to different application environments, you can very easy to DIY your video intercom & paging equipment. PA2 is the best choice for everyone.
Highlights
- Compatible with standard SIP protocol and main IPPBX/IMS platform
- All-in-one wall-mounted design, integrated with network audio codec, and a digital amplifier. Build-in Max 30W power amplifier
- Online or keypad adjust the volume output
- Build-in audio output to connect to an external speaker
- Build-in audio input to connect an external MIC
- Embedded 1 short-in detect port and 1 Short-out control port
- Optional for 1 or 2 DSS Key
- 2 Standard RJ45 ports. One for the WAN port, the other for Video Camera
-
PL 3200 O
Call for Price Security SystemsOPTICAL SMOKE DETECTOR WITHOUT ISOLATOR
Optical smoke detector for Loop 3000 with two optical sensors for earliest fire detection and indication according to EN 54-7
Highlights
- Pollution detection of the smoke measurement chamber by an additional optical path
- Detector sensitivities are automatically adapted and programmable
- Fault monitoring of the measurement chamber signal and Loop 3000 electronics
- Periodic sensor test
- Automatic and manual addressing with Loop 3000
- Alarm output to control parallel indicator
- Functions completely integrated via Loop 3000 protocol
- Presence and absence switching with selectable sensitivities
- Storage of last maintenance date
- Multicolour LED for alarm (red) and fault (yellow)
- Delivery including protective cover for the installation phase
-
PL 3300 MCP
Call for Price Fire AlarmMANUAL CALL POINT
Manual Call Point for loop3000 for the manual activation of an alarm with bidirectional isolator according to EN 54-11: A1, EN 54-17. Red plastic housing with imprint “burning house”.
Highlights
- Manual Call Point mechanics for the activation of a manual alarm
- Non-destructive activation and reset via mechanics
- Automatic and manual addressing with Loop 3000
- Integrated Isolator with T-branch
- Functions completely integrated via Loop 3000-protocol
- Integrated red Alarm-LED
-
PL 3300 OTi
Call for Price Fire AlarmINTELLIGENT MULTI-SENSOR DETECTOR WITH ISOLATOR
Intelligent optical and thermal multi-sensor detector for loop3000 with two optical and two thermal sensors and a bidirectional isolator for earliest fire detection and indication in all environments with difficult ambient conditions, according to EN 54-5/-7 /-17, prEN 54-29 and CEA 4021. Fusion® technology for the detection of the smallest smoke particles and fires in the early stage by using the wavelengths of the wide-band white light spectrum.
Highlights
- Individual use of the thermal measurement according to EN 54-5 in the sensitivity levels 2 to 5 as maximum detector (static –> A1S, A2S) or as rate-of-rise detector with a maximum threshold (differential and static –> A1R, A2R)
- Individual change of detector class for sensitivity levels 2 to 5 using Easy Check 3000
- Pollution detection of the smoke measurement chamber by an additional optical path
- Detector sensitivities are automatically adapted and programmable
- Integrated measurement system and algorithm for condensation recognition (Humitec®)
- Intelligent analysis and suppression mode for the elimination of false alarms (e.g. cigarette smoke)
- Highest reliability by optimal adjustment of the alarm threshold via intelligent algorithm for the fire detection
- Fault monitoring of the measurement chamber signal and Loop 3000 electronics
- Periodic sensor test
- Automatic and manual addressing on Loop 3000
- Integrated isolator and T-branch option
- Alarm output to control parallel indicator
- Functions completely integrated via Loop 3000 protocol
- Presence and absence switching with selectable sensitivities
- Storage of last maintenance date
- Multicolour LED for alarm (red) and fault (yellow)
- Delivery including dust protection cover for installation phases
-
PL 3300 PBDH ABS R
Call for Price Fire AlarmMANUAL CALL POINT, RED
Manual Call Point for Loop 3000 for the manual activation of an alarm with bidirectional Isolator and status display via LED according to EN 54-11.
Highlights
- Push Button mechanics for the activation of a manual alarm
- Activation after smash of the front glass
- Integrated reset mechanics
- Automatic and manual addressing with Loop 3000
- Integrated Isolator and T-branch option
- Functions completely integrated via Loop 3000-protocol
- Integrated red LED for Alarm
-
PL 3300 S 1 SE
Call for Price Fire AlarmCONUS – LOOP SOUNDER – RED
Intelligent acoustic signaling device for the Loop 3000 for the external acoustic alarm with bidirectional isolator according to EN 54-3 and EN 54-17.
Highlights
• Activation, monitoring, and supply via Loop 3000-protocol
• Integrated automatic reset function at signal “external signal line on/off” by the fire control panel
• Monitoring of the operating status via Loop 3000
• Independent programming via loop address
• Automatic and manual addressing with Loop 3000
• Integrated Isolator
• 28 different tones, adjustable via DIP-switch including DIN-signal
• Loudness adjustable via DIP-switch
• Functions completely integrated via Loop 3000-protocol
• An aesthetical, robust wall-mounted housing according to IP 41
• Integrated detector base of the PL 3000 series
Shopping Cart